from the blog.

Changing a Refrigerator Liquid Supply Valve. How exactly does a water supply valve work?

Changing a Refrigerator Liquid Supply Valve. How exactly does a water supply valve work?

In the event your ice box features a water and ice dispenser function, and on occasion even simply an installed ice maker, a water supply valve is needed to get a handle on water getting into the applying. The supply valve is generally positioned at the bottom backside regarding the fridge behind an access panel. The home’s water supply generally travels through copper tubing connected to the valve inlet port.

The supply valve is a component that is electrically-control inlet and socket water ports plus one or maybe more solenoids.

whenever signaled by way of a control board, the solenoid or solenoids will available to enable water to enter an inlet hose which directs water via an optional water filter towards the dispenser and/or to an ice maker tray fill tube. In the long run, the solenoids can fail or calcium deposits can develop when you look at the valve producing an obstruction, leading to the ice manufacturer struggling to produce ice and limited, or no, water appearing out of the dispenser if the lever is pushed. Since water supply valves can not be effortlessly washed or repaired, a valve that is malfunctioning be replaced by having a brand new one.

How exactly to replace a faulty water supply valve

  • Unplug the refrigerator’s cord.
  • Shut from the water supply into the ice box.
  • Pull the ice box from the wall surface.
  • Unthread the screws to get rid of the low access panel that is rear. Bear in mind, you may want to detach the copper tubing or water that is incoming through the inlet valve port before you completely take away the panel.
  • Detach the incoming water line through the water supply valve inlet slot for those who haven’t done this currently.
  • Unthread the screws to discharge the water supply valve mounting bracket or plate through the refrigerator framework.
  • Disconnect the cable connecter or connecters through the solenoid terminals.
  • If applicable, slide out any locking videos then depress the keeping rings to detach the socket hose or hoses through the valve ports. Be ready for some water to spill.
  • If required, get rid of the water that is old valve through the mounting dish or bracket.
  • Install the brand new water supply valve by aligning it regarding the mounting dish or bracket if required.
  • Completely place the hose or hoses in to the socket ports and, if needed, fall in the locking clip or videos to secure.
  • Connect the cable connecter or connecter to your terminals that are solenoid.
  • Position the mounting plate or bracket regarding the ice box frame and thread the screws to secure.
  • Realign the access panel and secure it because of the screws.
  • Connect the water that is incoming towards the valve’s inlet slot. In the event that water will be provided through copper tubing, hand-thread the tubing’s compression nut on the inlet slot then make use of a wrench to tighten up. Avoid overtightening or perhaps you may harm the tubing.
  • Go the ice box straight right straight back up against the wall surface.
  • Turn water supply right straight straight back on.
  • Plug the power that is refrigerator’s back.
  • Switch on the ice manufacturer or run water through the dispenser to ensure the brand new supply valve is working correctly and there are no leakages.

Discover the water that is right valve with fix Clinic

Since water supply valves will be different with regards to the ice box model, it is crucial to spot the exact valve that fits your ice box. To work on this, go into the complete model wide range of the applying when you look at the Repair Clinic search club, then select “Valve & Float” through the component category filter from the remaining part associated with the web web web page to find the part that is matching. Fix Clinic stocks water supply valves for all the top brand name fridges, including Frigidaire, Whirlpool, Kenmore, Samsung, and LG, but you’ll would you like to be sure you’re purchasing the specific valve that matches your model.